This weekend is the Artisan Guitar Show in Harrisburg, Pennsylvania, at the Central Hotel and Conference Center.
This will be a gathering of luthiers, guitar and instrument builders, musicians, lecturers, pickers and players. The best of the best will be there exhibiting their instruments.
I am pleased to have been invited to exhibit at this event.
At the top of this page you will find some links to some of the instruments I will be showing this weekend. I will have other instruments not featured on this page. Click on the links above to read more detail about the guitars featured this weekend.
In May, 12, 13 & 14,, The LaConner Guitar Festival will take place in La Conner, Washington. I am looking forward to that as well and will be exhibiting there.
Thanks for reading.
Please scroll to may past posts to see more work and read more about the my instruments. I hope you can make the show. If you do please stop by my table. Thanks!!
On October 21, 22, and 23, 2016, The “Woodstock Invitational Luthiers Showcase” will commence again in Woodstock, New York. The dates are October 21, 22, and 23, 2016. The event is held at The Bearsville Theater and Utopia Sounstage on Tinker Street.
This will be a three day exhibition of hand-built acoustic guitars and instruments exhibited by by their makers.
This show is always an amazing opportunity to see, hear and play some of the finest instruments on this planet. The show has exhibitors from around the globe. Daily and half hourly performances by some of the finest musicians playing these hand made instruments happen on the main stage. There are lectures workshops and demonstrations. I suggest that you make this a go-to event if you love guitars and can make the trip. Find out more at The Woodstock Invitational Website Page http://www.woodstockinvitational.com.
I am excited to be exhibiting there and am pleased to be included as an exhibitor with all the other fine builders. This year I will be in the main room rubbing shoulders and hob knobbing with other masters of this craft who’s work I admire greatly.
The instruments below have been built over the past year and will be on display; A Kasha Classical, an experimental guitar design of mine I call “The Arches”, A 7-string Baroque transitional guitar built to the exact measurements of a the original created over 200 years ago, and my PF model in Quilted maple with a Moonwood soundboard and Mahogany neck.
I hope to see you in Woodstock. This will be an excellent to own a Jay Rosenblatt Original guitar if that is your fancy. Please stop in to say hello.
In January, 2016 I bagan a project to build Two Kasha Classical “sister” Guitars. They are being built built with my friend Frank Sole, musician and student Luthier. This project was inspired by Frank. This instrument differs greatly in the bracing design of typical classical guitars and was developed by Dr. Michael Kasha in cooperation with luthier Richard Schneider. The instrument features a bracing design by Dr.Richard Kasha which is star patterned rather than ladder braced and the back braces are arched allowing the back to float independently and act more like a from that moves with the vibrations and air movement in the guitar ,rather that being fixed by rigid cross bracing. The soundboard is designed to increase the energy of the strings as they affect the soundboard and provide an increased bass response.
It began with a paper plan from Luthiers Mercantile, the construction of a Solera ( the building form) is based on a design by John Bogdonavitch, luthier. (see his book “Building the Concert Classical Guitar”) The set up on the solera allowed a 2 mm forward tilt in the neck and a ramp of 3 mm built up from the bridge location to the end of the guitar to create the proper string geometry. (now that one guitar is fully complete, that set-up worked perfectly. The strings are at the proper height and has excellent playability.
Both guitars are rosewood with rosewood sides, western red cedar tops, Spanish Cedar necks with Mahogany neck blocks. One instrument was constructed with cedar bracing and the other spruce. (these are the only two principal differences between theses instruments. The end port is constructed to allow access to the inside of the instrument for stringing as this guitar uses a through the soundboard string design which differs from traditional classical guitars where the strings on the bridge on the top of the soundboard.
The saddle design here is a three part configuration of American Walnut, Figured maple and bone. It has a bone nut and medium fret wire. The back “floating brace design” is constructed of maple and mahogany laminations.
Both instruments were hand finished with French polish. These instruments will be on display and for sale at the Woodstock Luthiers Invitational October 21, 22, & 23, 2016. Inquiries about pre-purchase can be discussed.